TM 55-1520-240-23-1
1-77.1
CLEAN WINDSHIELD
(Continued)
1-77.1
Do not use anything except naphtha
(E245) or cleaner (E116) to wipe oil
and grease off windshield (2). Surface
will be damaged.
10.
Wipe off all oil and grease from outside of
windshield (2). Use clean cloth (E120) damp
with naphtha (E245) or cleaner (E116). Wear
gloves (E186).
11.
Wipe off outside surface of windshield (2). Use
clean cloth (E128) damp with water.
12.
Put glass cleaner (E115) on outside surface of
windshield (2) with clean cloth (E120).
Stop polishing surface of windshield
(2) as soon as surface is dry. Surface
can be damaged. If dry windshield is
rubbed with cloth.
13.
Polish outside surface of windshield (2) with
another clean cloth (E120) until all of outside
surface is clear and dry. Stop rubbing as soon as
surface of windshield (2) is dry.
14.
Hold wiper arm (1) to free cotter pin (3).
15.
Remove cotter pin (3) from hole near hub (4).
16.
Lower wiper arm (1) against windshield (2).
17.
Perform steps 14 thru 16 for other wiper arm (5).
1-292
