TM 55-1520-240-23-1
1-77.1
CLEAN WINDSHIELD
(Continued)
1-77.1
CLEAN OUTSIDE SURFACE
1.
Raise and hold wiper arm (1) away from surface
of windshield (2).
2.
Put cotter pin (3) through hole in wiper arm (1)
near hub (4).
3.
Perform steps 1 and 2 for other wiper arm (5).
4.
Flush outside of windshield (2) with clean running
water to remove loose dirt.
Do not use chamois to rub off dirt from
windshield. Surface of windshield
can be damaged. Use chamois only
to apply soap and water solution to
windshield.
5.
Put soap (E352 or E353) and water solution on
outside surface of windshield (2), using chamois
(E111).
6.
Wash outside surface of windshield (2) with soap
(E352 or E353) and water solution. Use bare
hand to rub off dirt.
7.
Rinse outside surface of windshield (2) with clean
water until all soap solution and dirt are gone.
8.
Let outside surface of windshield (2) dry
completely.
9.
Wipe off all dirt and foreign material from rubber
of blades (6) using clean cloth (E120) damp with
water.
1-291
