TM 55-1520-240-23-9
11-208
REMOVE LCT CONNECTING LINK ROD END BEARING (AVIM)
11-208
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Vise, Soft Jaws
Materials:
None
Personnel Required:
Medium Helicopter Repairer
References:
TM 1-1520-253-23
Equipment Condition:
Off Helicopter Task
NOTE
Procedure is same to remove rod
end bearing from forward LCT
connecting link (414C3056-4) or aft
LCT connecting link (414C3056-3).
NOTE
If a crack in the connecting links is
suspected during removal, refer to TM
1-1520-253-23.
1.
Remove lockwire from checknut (1) and spring
tension clip (2).
Do not damage locking tabs of spring
tension clip.
2.
Clamp link (3) in vise (4). Hold rod end bearing
(5) with open end wrench. Loosen checknut (1).
11-827