TM 55-1520-240-23-9
11-65
ASSEMBLE THRUST CONTROL (AVIM)
(Continued)
11-65
24.
Install clamp (41) on cable (36).
25.
Position clamp (41) on clip (22). Install screw
(42), two washers (43), and nut (44).
26.
Insert cable (36) through backshell (45).
27.
Remove tape from end of cable (36). Clean all
contact pins (46) with dry cleaning solvent (E162)
and cloth (E120). Wear goggles to protect eyes.
Wear gloves (E184.1).
28.
Insert 15 contact pins (46) into electrical
connector (47). Use insertion/extraction tool.
Match letter on wire to letter on connector.
INSPECT
29.
Install backshell (45) onto connector (47).
30.
Install cable strap (E376) (48).
11-296