TM 55-1520-240-23-9
11-63
DISASSEMBLE THRUST CONTROL (AVIM)
(Continued)
11-63
2.
Disconnect 15 contact pins (4) of cable (5) from
connector (3). Use insertion/extraction tool.
Remove backshell (2). Wrap tape (E388) tightly
around bundle of contact pins for protection.
3.
Remove nut (6), two washers (7), screw (8), and
clamp (9) from clip (10). Remove clamp from
cable (5).
4.
Wrap tape (E388) around shaft (11) to prevent
motion of pivot block (12).
11-286