TM 55-1520-240-23-9
11-62
REMOVE THRUST CONTROL (COPILOT)
(Continued)
11-62
3.
Tilt light (3) and housing assembly (5) to one
side and support it.
4.
Remove nut (6) and washer (7) from ground stud
(8). Disconnect electrical lead (9).
5.
Lower housing assembly (5). Support housing
assembly so it does not hang. Use strap (E376).
Remove gasket (10).
6.
Disconnect electrical connector (11).
7.
Remove screw (12) and clamp (13). Remove
clamp (13) from cable (14).
11-283