TM 55-1520-240-23-7
9-97
REMOVE OVERHEAD PANEL
(Continued)
9-97
1.
Remove two bolts (1) from brackets (2).
2.
Pivot panel (3) down until strap (4) stops travel.
3.
Tag and disconnect six connectors (5).
4.
Tag and disconnect two wires (6) from terminal
(7) by removing nut (8) and washer (9). Tape
wire ends. Use tape (E395).
5.
Tag and disconnect wire (10) from terminal (11)
by removing nut (12) and washer (13). Tape wire
ends. Use tape (E395).
6.
Remove screw (14), three washers (15), and nut
(16) from ground wire (17).
7.
Have helper support panel (3). Remove two bolts
(18) from strap (4).
8.
Remove two bolts (19), four washers (20), and
two nuts (21) from bracket (22).
9.
Remove panel (3).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-311