• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REMOVE  APU FUEL SHUT-OFF RELAY
INSTALL APU  FUEL SHUT-OFF RELAY (Continued)

TM-55-1520-240-23-7 CH-47D Heilcopter Manual
Page Navigation
  462    463    464    465    466  467  468    469    470    471    472  
TM  55-1520-240-23-7 9-34.2 INSTALL  APU  FUEL SHUT-OFF  RELAY 9-34.2 INITIAL  SETUP Applicable  Configurations: All Tools: Electrical  Repairer’s Tool  Kit, NSN 5180-00-323-4915 Biddle  Ohmmeter  (T7) or  Equivalent Materials: Cloths  (E120) Gloves  (E184.1) Naphtha  (E245) Personnel  Required: Aircraft  Electrician References: TM  9-6625-975-35 TM  55-1500-323-24 TM  55-1500-343-23 Equipment  Condition: Battery Disconnected  (Task  1-39) Electrical  Power  Off Cabin  Acoustic  Blanket  Removed  Sta.   360  (Task 2-208) Naphtha  (E245)  is  flammable  and toxic.   It can  irritate  skin  and  cause burns.   Use  only  with  adequate ventilation, away  from  heat or open flame.   Avoid  contact  with  skin,  eyes, or  clothing.   In  case  of  contact, immediately  flush  skin  or eyes  with water for  at  least  15 minutes.   Get medical  attention  for eyes. 1. Clean  bonding  and  grounding  surfaces thoroughly  before  installing  APU  fuel  shut-off relay (1).  Use  naphtha  (E245) and  cloths  (E120). Wear  gloves  (E184.1)  and  goggles. 2. Install  APU  fuel  shut-off  relay  (1) on  aircraft structure (2) with four screws (3) and washers (4). 9-112







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.