TM 55-1520-240-23-7
9-12
REMOVE REVERSE CURRENT CUTOUT (RCCO) RELAY
(Continued)
9-12
NOTE
Procedure is same for removal of
reverse current cutout relay from No.
1 or No. 2 power distribution panel.
Removal of RCCO relay from No. 2
power distribution panel is shown
here.
1.
Loosen six fasteners (1) and open power
distribution panel door (2).
2.
Tag and disconnect seven wires (3) from four
terminals (4) on RCCO relay (5) by removing four
nuts (6) and washers (7). Tape ends. Use tags
(E264) and tape (E385).
3.
Remove nut (8) and washer (9) from terminal
(10).
4.
Loosen nut (11) and move bar (12) to clear (5).
5.
Remove four bolts (13) and washers (14).
Remove relay (5).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-47