TM 55-1520-240-23-7
8-82.1
REPLACE FUEL QUANTITY SYSTEM COAXIAL CONNECTOR CONTACTS
(Continued)
8-82.1
SOLDER METHOD CONTACT REPLACEMENT
Soldering Equipment Setup
Do not touch soldering gun nozzle
or tip. Tip temperature is more than
500ºF. Serious burns could result if
touched.
1.
Install reflector (1) over nozzle (2) of gun (3).
2.
Place gun (3) in stand (4).
3.
Attach heater (5) to air supply. Using knob (6),
adjust indicated air pressure to 30 psi.
4.
Attach heater to 120 vac.
5.
Adjust air to 50 psi. The heat light (7) on the
heater (5) will come on.
6.
Allow heat to stabilize for 1 minute. It may
be necessary to readjust the air pressure to
maintain 50 psi.
8-264