TM 55-1520-240-23-6
7-175.1
ASSEMBLE ACCUMULATOR (AD-B130-1D390) (AVIM)
(Continued)
7-175.1
4.
Lightly coat packing (6) and retainer rings (7)
with hydraulic fluid (E199).
5.
Install packing (6) and retainer rings (7) in groove
of retainer (3).
6.
Apply light coat of hydraulic fluid (E199) to inside
wall of housing (1) and OD of piston (2) in area
of packing (4). Use cloth (E120).
NOTE
The two inches will allow enough
space to insert retainer (3).
7.
Install large end of piston (2) into housing (1) for
a distance of approximately two inches.
8.
Place gas port end of housing (1) in vise (10).
9.
Apply light coat of hydraulic fluid (E199) in
retainer area of packing (6). Use cloth (E120).
10.
Thread retainer (3) into housing (1) and torque to
20 to 30 foot-pounds.
7-730