TM 55-1520-240-23-6
7-174
DISASSEMBLE AND INSPECT ACCUMULATOR (60910) (AVIM)
(Continued)
7-174
5.
Push cap (9) and separator (10) from housing
(1). Use 3/8 inch rod (11).
6.
Remove cap (9) from separator (10).
7.
Remove rod (11) from housing (1).
8.
Measure inside diameter of housing (1). Inside
diameter shall not be more than 1.618 inches.
9.
Remove two retainers (12) and packing (13) from
cap (9).
10.
Inspect lands (14 and 15) of cap (9). There shall
be no nicks or burrs.
11.
Remove two retainers (16) and packing (17) from
separator (10).
12.
Measure outside diameter of separator (10) at
two lands (18). Outside diameter shall not be
more than 1.612 inches.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-725