TM 55-1520-240-23-6
7-329
FLUSH UTILITY PUMP AND APU RETURN TUBING
(Continued)
7-329
Filter assembly kit
ADHT6814-M9716M must be
installed in test stand pressure
lines. Otherwise, system can be
contaminated.
NOTE
To operate hydraulic test stand, refer
to applicable manual.
1.
Working from ramp, remove four bolts (1)
and washers (2) from accumulator mount (3).
Disconnect two tees (4 and 5) from mount.
Remove mount.
2.
Install plug (6) in return tee (5).
3.
Disconnect tube (7) from RSVR port (8) of return
control module (9).
4.
Connect test stand pressure hose (10) to tube
(7).
7-1208