TM 55-1520-240-23-6
7-287
ASSEMBLE CARGO DOOR ACTUATOR MOTOR (AVIM)
(Continued)
7-287
4.
Install valve head (7) and four nuts (8) on studs
(9).
5.
Torque nuts (8) to 75 inch-pounds.
6.
Temporarily install screw (10) and washer (11)
on shaft (4).
7.
Pull up screw (10) and washer (11) and install
retaining ring (12) on shaft (4).
8.
Remove screw (10) and washer (11).
9.
Install retainer (13) on shaft (4) so that notches
in retainer align with grooves in shaft.
10.
Install washer (11) and screw (10).
11.
Insert two rods (14) through notches in retainer
(13) into grooves in shaft (4).
12.
Hold rods (14) and tighten screw (10).
13.
Remove rods (14).
7-1071