TM 55-1520-240-23-6
7-286
DISASSEMBLE AND INSPECT CARGO DOOR ACTUATOR MOTOR (AVIM)
(Continued)
7-286
5.
Install washer (7) and screw (6) on shaft (5).
6.
Pull upward on screw (6) and washer (7) and
remove retaining ring (8).
7.
Remove screw (6) and washer (7) from shaft (5).
8.
Remove lockwire and four nuts (9) from valve
head (10).
NOTE
Do not remove shaft with valve head.
9.
Push down on shaft (5) wIth 1/4 inch rod (11)
and remove valve head (10) from housing (12).
10.
Remove packing (13) from shaft (5).
11.
Remove packing (14) from housing (12).
12.
Remove motor (1) from vise (2).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-1069