REPLACE RIGHT ENGINE TRANSMISSION OIL COOLER BYPASS VALVE
Do not let oil spill on fins of oil cooler.
Spilled oil will spray from cooler during
Remove lockwire from bypass valve (5). Remove
valve from oil cooler (3). Use cloths (E120) to
absorb oil spillage.
Remove packing (6) from valve (5).
Oil (E254) is a skin irritant. If oil
gets on skin, wash thoroughly. If oil
soaks into clothes, change clothes
Oil (E254) gives off fumes that can
cause injury to personnel. Use oil in a
Coat packing (6) and thread of bypass valve (5)
with oil (E254). Install packing on valve.
Install valve (5) in oil cooler (3).
Lockwire valve (5) to oil cooler (3). Use lockwire
Service combining transmission (Task 1-54).
Close aft pylon doors (Task 2-2).
END OF TASK