INSTALL ENGINE TRANSMISSION INLET SCREEN
Oil (E254) is toxic. It can irritate skin
and cause burns. Avoid inhaling. Use
only with adequate ventilation. Avoid
contact with skin, eyes, or clothing.
In case of contact, immediately flush
skin or eyes for at least 15 minutes.
Get medical attention for eyes.
Procedure is same to install left or
right engine transmission screen.
Installation of right screen is shown
Coat packing (1) and thread of screen (2) With
oil (E254). Install packing on screen.
Remove tape and barrier material from cavity (3).
Install screen (2) in cavity (3). Torque screen to
Lockwire screen (2) to oil pressure switch (4).
Use lockwire (E231).
Close aft pylon access doors (Task 2-21).
END OF TASK