INSTALL ENGINE TRANSMISSION
Check to see if there are bolts installed on engine
(1) at locations (2 and 3). If so, remove bolt at
(2) for right installation. Remove bolt at (3) for
Install packing (4) on engine (1).
Oil (E254) is toxic. It can irritate skin
and cause burns. Avoid inhaling. Use
only with adequate ventilation. Avoid
contact with skin, eyes, or clothing.
In case of contact, immediately flush
skin or eyes for at least 15 minutes.
Get medical attention for eyes.
Coat packing (5) with oil (E254). Install packing
on quill shaft (6).
Do not use grease on quill shaft
splines. Grease will contaminate
Coat splines (7) on both ends of quill shaft (6)
with oil (E254). Install shaft in engine (1).