ASSEMBLE (BUILD UP) RIGHT ENGINE TRANSMISSION
Install reducer (7) and packing (8) in port (12).
Torque reducer to 90 inch-pounds.
With 37 , remove chip detector assembly (13)
from top of transmission (Task 6-208.1). Install
assembly in place of drain plug (14) (Task
6-208.2). Install drain plug at top of transmission.
Torque to 90 inch-pounds.
Install chip detector/temperature sensor (10)
and packing (11) in port (9). Use modified
socket (APP E57). Torque chip detector to 90
inch-pounds. Lockwire chip detector to plug
(14) with lockwire (E231).
Install plug (4) and packing (5) in port (15).
Lockwire plug (4) to plug (14) with lockwire
Dry cleaning solvent (E162) is
flammable and gives off toxic fumes.
It may irritate skin and cause burns.
Use only in well-ventilated area away
from heat and open flame. In case
of contact, immediately flush skin
or eyes with water for at least 15
minutes. Get medical attention for
Clean union (16) and elbow (17). Use dry
cleaning solvent (E162) and cloths (E120).
Wear gloves (E186). Dry with low pressure
Install union (16) and packing (18) in port (19).
Install nut (20) on elbow (17). Install elbow and
packing (21) in port (22) with elbow pointing up.