TM 55-1520-240-23-4
5-101
REMOVE DRIVE ARMS
(Continued)
5-101
REMOVE UPPER DRIVE ARM FROM DRIVE COLLAR
WITH 46
5.
Remove cotter pin (13), nut (14), and washer
(15) from bolt (16).
6.
Install bolt removal tool (E-25) (17) on installed
bolt (16). Tap the bolt through upper drive arm
(18) until it can be removed. Remove the bolt.
7.
Remove drive arms (12 and 18) as an assembly.
Retain shouldered bushing (19) in the lug of drive
collar (20) with plastic strap (E374).
REMOVE UPPER DRIVE ARM FROM DRIVE COLLAR
WITHOUT 46
8.
Remove cotter pin (13) and nut (14) from bolt
(16).
9.
Remove bolt (16). Do not pry the bolt free. If
needed, tap it with a plastic mallet.
10.
Remove drive arms (12 and 18) as an assembly.
Retain shouldered bushing (19) in the lug of drive
collar (20) with plastic strap (E374).
5-615
