TM 55-1520-240-23-4
5-81
INSTALL TIEDOWN RECEIVER
(Continued)
5-81
2.
Mix a small amount of adhesive (E40, E41, or
E43) as follows:
a.
For adhesive (E40), follow directions on the
kit.
NOTE
Prepackaged adhesive (E40) is
preferred. Use adhesive (E41 or E43)
only if prepackaged kit is not available.
b.
For adhesive (E41), weigh 100 parts of resin
and 23 parts of hardener. Use trip balance.
Mix in polyethylene cup (E157) until color is
uniform. Use wood spatula (E424). Wear
gloves (E186).
c.
For adhesive (E43), weigh 7 parts of gray
hardener and 5 parts of white base. Use trip
balance. Mix in polyethylene cup (E157) until
color is uniform. Use wood spatula (E424).
Wear gloves (E186).
3.
Apply adhesive to countersink (1) and flange of
receiver (2). Wear gloves (E186).
4.
Install receiver (2) into blade (3). Use tool (T25)
(4).
5-456