INSTALL AFT BRAKE
If axle (15) was removed, install axle (Task 3-35).
Sealing compound (E336) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Apply a coat of sealing compound (E336) to
the bore of sleeve bushing (13) and one or two
Install one or two spacers (14) if removed, and
sleeve bushing (13). Install bushing while sealant
is still wet. Wear gloves (E184.1).
Install wheel (Task 3-12).
Bleed brakes (Task 7-330).
Remove jacks (Task 1-24).
Set parking brake.
END OF TASK