INSTALL FORWARD BRAKES
Sealing compound (E350) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Apply sealing compound (E350) to bore of
bushing (14). Install bushing on axle (7) while
sealant is wet. Make sure shoulder of bushing
faces away from disk (6). Wear gloves (E164.1).
If axle (7) was removed, install axle (Task 3-15).
Connect tube (15) to union (2).
Repeat steps 1 thru 10 to install other brake (16).
Install forward wheels (Task 3-12).
Remove jack from forward landing gear (Task 1-23).
Bleed brake system (Task 7-330).
END OF TASK