TM 55-1520-240-23-3
3-76
INSTALL BRAKE LINING
(Continued)
3-76
7.
Check that linings (3) are correctly positioned
in keyway. Check for 0.040 inch maximum
clearance without backing out cylinder heads
more than two full turns (Task 3-75).
8.
Insert 0.040 inch shim (7) between disk (6) and
lining (3).
9.
Turn cylinder head (8) into housing (9) until head
is flush with housing.
10.
Back out cylinder head (8) until shim (7) can be
removed. Use spanner (APP E-35).
11.
Repeat steps 8 thru 10 for two remaining linings
(3).
12.
Turn cylinder heads (8) into housing (9) until
heads are flush with housing.
3-203