TM 55-1520-240-23-3
3-58
INSTALL SWIVEL HOUSING SEALS
(Continued)
3-58
3.
Coat packing (4) with grease (E190). Install
packing in groove of plate (3).
Moisture in swivel housing can cause
corrosion and lead to cracks.
4.
Wipe inside of swivel housing (5) dry. Use cloth
(E120).
5.
Position plate (3) on housing (5). Make sure
packing, retainers, and seals stay in place.
6.
Install six screws (6) to secure plate. Lockwire
screws together. Use lockwire (E231).
7.
For an aft left gear, install sleeve spacer (7),
and end cap (8). Torque end cap to 31 to 37
inch-pounds. Check that sleeve spacer has
slight end play.
8.
For an aft right gear, install steering lever (Task
3-70).
3-151
