• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
INSPECT LOWER DRAG  LINK  PARTS (AVIM) (Continued)
ASSEMBLE  LOWER  DRAG  LINK  (AVIM)

TM-55-1520-240-23-3 CH-47D Heilcopter Manual
Page Navigation
  114    115    116    117    118  119  120    121    122    123    124  
TM  55-1520-240-23-3 3-46 REPAIR  LOWER  DRAG  LINK  (AVIM) 3-46 INITIAL  SETUP Applicable Configurations: All Tools: Machine  Shop  Set,  NSN  4920-00-405-9279 Materials: Crocus  Cloth  (E122) Epoxy  Primer (E292.1) Polyurethane  Paint  (E285.3) Gloves  (E184.1) Personnel  Required: Machinist Inspector References: TM  55-1520-240-23P Equipment  Condition: Off  Helicopter  Task NOTE Procedure  is  same  to  repair  left  or right  lower  drag  link. 1. Remove  minor  nicks, burrs,  scoring,  scratches, or pitting  on  parts  (1  thru  10) with  crocus cloth (E122). Epoxy  primer  (E292.1)  and polyurethane  paint  (E285.3)  are flammable  and  toxic.   They  can irritate  skin  and  cause  burns.   Avoid inhaling.   Use  only  with  adequate ventilation.  Avoid  contact  with  skin, eyes,  or  clothing.   Keep  away  from heat,  sparks,  and  open  flame.   In case  of  contact,  immediately  flush skin  or  eyes  with  water for  at  least 15  minutes.   Get medical  attention for  eyes. 2. Touch  up  damaged  finish  with  primer (E292.1) and  polyurethane  paint  (E285.3).  Wear  gloves (E184.1). INSPECT FOLLOW-ON MAINTENANCE: None END  OF  TASK 3-121







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.