TM 55-1520-240-23-3
3-35
INSTALL AFT LANDING GEAR AXLE
(Continued)
3-35
INSTALL AXLE
NOTE
Procedure is same for left and right
axle. Left side is shown. Static ground
wire is installed on left side only.
1.
Install axle extension (1) in axle (2) and align
bolt holes.
2.
Install axle (2) in housing (3) and align bolt holes.
3.
Install bolt (4) with packing (5) through axle (2)
and housing (3).
4.
Install packing (5), bracket (6), washer (7), nut
(8), and new cotter pin (9).
5.
Install sleeve (10) and retaining ring (11).
INSPECT
FOLLOW-ON MAINTENANCE:
Install wheel (Task 3-12.1).
Lower and remove jack (Task 1-24).
END OF TASK
3-89