TM 55-1520-240-23-10
16-115
REMOVE AND INSTALL EAPS FOD SCREENS
16-115
INITIAL SETUP
Applicable Configurations:
All
Tools:
Mechanics Tool Kit, NSN 5180-00-323-4692
Personnel Required:
Medium Helicopter Repairer (2)
Inspector
Equipment Condition:
Remove EAPS (Task 16-109)
NOTE
Mounting ring for RH EAPS requires
thirty-two screws and washers for
installation, whereas LH EAPS
mounting ring requires only thirty
screws and washers.
1.
Remove thirty or thirty-two screws (1) and
washers (2) from FOD screen (3).
2.
Remove FOD screen (3) and mounting ring (4)
as an assembly from EAPS.
3.
Remove debris from FOD screens using a
vacuum cleaner.
4.
Install FOD screen/mounting ring assembly in
EAPS, and secure with thirty or thirty-two screws
(1) and washers (2).
INSPECT
FOLLOW-ON MAINTENANCE:
Install EAPS (Task 16-110).
END OF TASK
16-376