TM 55-1520-240-23-10
16-114
INSTALLATION OF EAPS SLIDE BEARING/BLOCKS
16-114
INITIAL SETUP
Applicable Configurations:
All
Tools:
General Mechanics Tool Kit, NSN 5180-00-323-4692
Personnel Required:
Medium Helicopter Repairer (2)
Inspector
Equipment Condition:
EAPS Removed (Task 16-109)
FORWARD
OUTBOARD
1.
Install stainless steel washer (9) and new slide
bearing (8) in slide block (5).
2.
Install slide block (8) and attach with four bolts
(6) and washers (7).
INBOARD
3.
Install new slide block (15) in slide block (10).
4.
Install shim (12) (if applicable) and slide block
(10) and attach with four bolts (6) and washers
(7).
AFT
OUTBOARD
5.
Install new slide block (15) and attach with two
nuts (13) and washers (14).
INBOARD
6.
Install new slide block (16) and attach with two
bolts (6) and washers (7).
INSPECT
FOLLOW-ON MAINTENANCE:
Install EAPS (Task 16-110).
END OF TASK
16-375