TM 55-1520-240-23-10
16-94
REMOVE INCLINOMETER SENSOR
16-94
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Materials:
Paper Tags (E264)
Personnel Required:
Medium Helicopter Repairer
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Electronic Compartment Acoustic Blanket Removed
(Task 2-107)
Amplifier-Coupler Removed (TM 11-1520-240-20)
Receiver-Transmitter Removed (TM 11-1520-240-20)
KY-75 Processor Removed (TM 11-1520-240-20)
IFM Amplifier Removed (TM 11-1520-240-20)
1.
Tag (E264) and disconnect connector (1) from
inclinometer (2).
2.
Loosen four captive screws (3).
NOTE
If shim(s) (4) are installed, note
location and retain for reinstallation.
3.
Remove inclinometer (2) and shim(s) (4) from
shelf (5).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
16-342