TM 55-1520-240-23-10
16-59.20 REMOVE AN/ALE-47 JUNCTION BOX
16-59.20
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electronic Equipment Tool Kit,
NSN 5180-00-064-5178
Materials:
Paper Tag (E264)
Personnel Required:
Avionics Mechanic
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
AN/ALE-47 Safety Switch Pin Installed
(TM 1-1520-240-10)
Cabin Acoustic Blanket Removed (Task 2-208)
1.
Disconnect, tag and cap two electrical connectors
(4 and 12) from junction box receptacles (3 and
11).
2.
Remove four screws (7) and eight washers (6)
securing cover (5) to junction box (2).
CAUTION
Support junction box while removing
screws. Failure to comply may result
in damage to junction box.
3.
Remove four screws (9) and washers (10)
securing junction box (2) to mount bracket (1).
4.
Remove junction box (2).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
16-250.40
Change 1