TM 55-1520-240-23-10
16-59.19 INSTALL AN/ALE-47 DISPENSER ASSEMBLY MOUNT (Continued)
16-59.19
NOTE
Procedures to install left and right
dispenser assembly mounts are the
same.
1.
Perform bonding check of electrical components
per Task 16-59.28.
2.
Install four bolts (2) and washers (1) to secure
dispenser assembly mount (3) to fuselage.
CAUTION
An over-torque of bolts can cause
a failure in retaining the dispenser
assembly during flight and flare
dispensing.
3.
Torque bolts (2) from 50-70 inch-pounds.
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
Change 1
16-250.39