TM 55-1520-240-23-10
16-24
DISASSEMBLE AND INSPECT FORWARD OR AFT CARGO HOOK (AVIM)
(Continued)
16-24
6.
Remove pin (12) and knob (13) from knob
retainer (14). Use 1/8-inch brass rod.
7.
Remove knob retainer (14) and retainer plug (15)
from cover (5).
8.
Remove retaining ring (16) and seal (17).
NOTE
Bumper is tight fit.
9.
Remove cotter pin (18), nut (19), two washers
(20), bolt (21), and bumper (22).
9.1.
Inspect bumper (22). There shall be no loss of
material.
10.
Remove cotter pin (23), nut (24), two washers
(25), bolt (26), and keeper (27).
10.1.
Inspect keeper (27). There shall be no cracks.
11.
Remove bushing (28) and spring (29) from
keeper (27).
16-122