DISASSEMBLE AND INSPECT FORWARD OR AFT CARGO HOOK (AVIM)
Load beam spring return is preloaded.
Be careful when removing three
retaining screws to prevent injury to
personnel or damage to equipment.
Remove spring return (87) as follows:
Remove two screws (88).
Position pin spanner (89) as shown.
Relieve tension against third screw (90) and
Rotate spring return (87) counterclockwise
until spring tension is relieved.
Remove spring return (87) from trunnion
Rotate load beam (92) away from rear plate (66).
Remove retaining ring (93) and rear plate (66)
from trunnion shaft (91).