TM 55-1520-240-23-10
16-7.1
ASSEMBLE CENTER CARGO HOOK (AVIM)
(Continued)
16-7.1
34.
Install switch (75), two washers (76), and nut
(77) in bracket (7).
35.
Install switch (78), two washers (79), and nut
(80) in bracket (15).
NOTE
Switches are lockwired after
adjustment (Task 16-7.2).
36.
Position cover (81) on former (14). Install five
screws (82), washers (83), plate (84), and strap
(85).
37.
Install screw (86), washer (87), and clamp (88)
on cover (81).
38.
Install hose (89) on actuating cylinder (2).
NOTE
Guard will be removed prior to
installation. It is temporarily installed
to prevent loss of hardware.
39.
Position two washers (90) under each side of
guard (91) between guard and formers (13 and
14). Temporarily install two bolts (92), washers
(93), and clamps (94).
40.
Position two washers (95) between guard (91)
and former (14). Temporarily install bolt (96) and
washer (97).
16-65