TM 55-1520-240-23-10
16-7.1
ASSEMBLE CENTER CARGO HOOK (AVIM)
(Continued)
16-7.1
Do not hammer bearings into formers.
Damage to bearings and formers will
result.
4.
Install bearings (11 and 12) in formers (13 and
14) (TM 55-1500-322-24). Use arbor press.
5.
Install bracket (15) with two washers (16) and
two bolts (17) on former (13).
6.
Install two stops (18) with two washers (19) and
two bolts (20) on formers (13 and 14).
7.
Install two cam stops (21) with four washers (22)
and four bolts (23) on formers (13 and 14).
8.
Position two cam roller bearings (24) in forks of
two cams (25 and 26). Install two cam bearing
pins (27) and cotter pins (28).
Cams and cam plates must be
installed correctly or cargo hook will
not function.
9.
Install two cams (25 and 26), two cam plates
(29), and six bolts (30) on formers (13 and 14).
16-60