TM 55-1520-240-23-10
16-5.1
DISASSEMBLE CENTER CARGO HOOK (AVIM)
(Continued)
16-5.1
20.
Remove nut (74), three washers (75), and bolt
(76) from keeper (77). Remove keeper, spring
(78), and spacer (79).
21.
Remove lockwire and six bolts (80) from support
block (81). Remove support block.
22.
Remove lockwire, nut (82), washer (83), switch
(84), and washer (85) from bracket (86).
23.
Remove lockwire, nut (87), washer (88), switch
(89), and washer (90) from bracket (91).
24.
If switches (84 and 89) are to be replaced, cut
and remove switch wires from wire pack (92).
25.
Remove formers (51 and 52) from actuating
cylinder support (46). Use plastic or fiber mallet.
26.
Remove pin (93) from former (51). Remove shaft
(94) and bearings (95 and 96) from former (52).
27.
Remove bearings (95 and 96) from shaft (94)
(TM 55-1500-322-24).
16-45