TM 55-1520-240-23-10
14-3
ADJUST WINCH LIMIT SWITCHES
(Continued)
14-3
26.
Have helper keep slight pull on cable (8) as cable
reels in. Helper must wear gloves (E185).
27.
Reel in cable (8) until mark just enters levelwind
rollers (14).
28.
Deleted.
29.
Loosen two screws (22). Position switch (23) in
slots of switch bracket (20) so that it is actuated
by striker bracket (21).
30.
Apply light coat of sealant (E330) to thread of
screws (22). Tighten screws.
INSPECT
31.
Test winch (17) (TM 55-1520-240-T).
32.
Turn off electrical and hydraulic power.
14-14