TM 55-1520-240-23-10
14-3.1
REPLACE WINCH LIMIT SWITCHES
(Continued)
14-3.1
REMOVE OUT/IN LIMIT SWITCH
5.
Remove four bolts (7) and washers (8). Move
winch (9) enough to gain access to switch (10).
6.
Remove two screws (11), washers (11.1), switch
(10), two adapters (11.2), bracket (11.3), and
spacer (11.4) from switch holder (12).
INSTALL OUT/IN LIMIT SWITCH
7.
Install spacer (11.4), bracket (11.3), two adapters
(11.2), and switch (10) in switch holder (12).
8.
Position switch (10) in slots of switch holder (12)
so that it is actuated by striker bracket (13).
9.
Apply light coat of sealant (E330) to thread of
screws (11). Wear gloves (E186).
10.
Install washers (11.1) and screws (11). Tighten
two screws (11).
INSPECT
11.
If no other switches need replacing, position
winch (9). Install four bolts (7) and washers (8).
Go to step 19.
14-19