TM 55-1520-240-23-9
11-233
INSTALL AFT LCT YOKE
(Continued)
11-233
NOTE
There may be two different five
digit codes marked on bolt P/N
BACB30ST10-40. The five digit code
81996 is not the manufacturers
CAGE code. If so marked, the number
81996 identifies the part as having
been manufactured in accordance
with a government Technical Data
Package (TDP).
Identify the five digit manufacturers
code or manufacturers name on the
head of the bolt. If the bolt head
is marked with one of the CAGE
codes or manufacturers name listed
below, the BACB30ST10-40 bolt is
serviceable:
NO BREAK - WORK HARDER
1. CAGE code 84256 (Avibank
Manufacturing Co.).
2. CAGE code 77272 (Boeing).
Remove and replace any
unserviceable bolts with serviceable
BACB30ST10-40 bolts from the
supply system.
Positive retention bolts are installed
in upper controls. Bolts have a pawl
which prevents nut or bolt removal
unless pawl is depressed (Task 1-13).
1.
If yoke (1) has no cable strap mounting plates,
attach two mounting plates (2) to top surface of
shorter arm (3). Install plates in same positions
as plates on yoke removed. Prepare surface and
install plates (Task 2-311).
2.
Remove two bolts (4 and 5), washers (6, 7, 8,
and 9) and nuts (10 and 11) from lugs (12 and
13) of yoke (1).
INSPECT
11-905
![](//www.tpub.com/assessment.jpg)