TM 55-1520-240-23-9
11-186
REMOVE MIXING LINKAGE CONNECTING LINKS
(Continued)
11-186
NOTE
Attaching bolts, washers, and nut will
be temporarily installed after major
component removal.
NOTE
If a crack in the connecting links
or bellcranks is suspected during
removal, refer to TM 1-1520-253-23.
REMOVE PITCH AND THRUST LINK
1.
Tag pitch and thrust link (1). Remove cotter
pin (2), nut (3), washers (4), and bolt (5) from
bellcrank (6). Remove link from bellcrank. Install
bolt, washers, and nut in bellcrank.
2.
Remove cotter pin (7), nut (8), washers (9), and
bolt (10) from bellcrank (11). Remove link (1).
Install bolt, washers, and nut in bellcrank.
REMOVE ROLL AND YAW LINK
3.
Tag roll and yaw link (12). Remove cotter pin
(13), nut (14), washers (15), and bolt (16) from
bellcrank (17). Remove link from bellcrank.
Install bolt, washers, and nut in bellcrank.
4.
Remove cotter pin (18), nut (19), washers (20),
and bolt (21) from bellcrank (22). Remove link
(12). Install bolt, washers, and nut in bellcrank.
11-731
