TM 55-1520-240-23-9
11-14.1
REPAIR FINISH OF BELLCRANKS AND CONNECTING LINKS
11-14.1
INITIAL SETUP
Applicable Configurations:
With 26
Tools:
Airframe Repairer’s Tool Kit, NSN 5180-00-323-4876
Materials:
Brush (E86)
Aliphatic Naphtha (E245)
Dry Cleaning Solvent (E162)
Abrasive Paper (E9)
Toluene (E422)
Cloths (E120)
Epoxy Primer (E292.1)
Protective Gloves (E184.1)
ALBI 107A Base Coating (E135.3)
ALBI 144 Top Coating (E135.4)
Alodine Powder (E65)
Nitric Acid (E22)
Marking Ink (E205)
Personnel Required:
Aircraft Structural Repairer
Inspector
References:
TM 55-1500-345-23
Equipment Condition:
Off Helicopter Task
General Safety Instructions:
ALBI 107A base coating (E135.3) and
ALBI 144 top coating (E135.4) are
combustable and toxic. They can
irritate skin and cause burns. Use
only with adequate ventilation, away
from open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Dry cleaning solvent (E162) is
combustable and toxic. Avoid contact
with skin, eyes, or clothing. Use
only with adequate ventilation, away
from open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Toluene (E422) and epoxy primer
(E292.1) are flammable and toxic.
They can irritate skin and cause burns.
Use only with adequate ventilation,
away from open flame. Avoid contact
with skin, eyes, or clothing. In case
of contact, immediately flush skin
or eyes with water for at least 15
minutes. Get medical attention for
eyes.
11-55
