TM 55-1520-240-23-9
11-149
REMOVE ROLL MAGNETIC BRAKE
11-149
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Materials:
Paper Tags (E264)
Personnel Required:
Medium Helicopter Repairer
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
Closet Acoustic Blanket Removed (Task 2-107)
Closet Backup Panel Removed (Task 2-2)
Roll Magnetic Brake at Neutral (TM 55-1520-240-T)
1.
Tag and disconnect connector (1) from roll
magnetic brake (2).
2.
Remove cotter pin (3), nut (4), two washers (5),
and bolt (6) from arm (7) of brake (2).
3.
Disconnect spring (8) from arm (7).
4.
Remove four bolts (9) and washers (10) from
brake (2). Remove brake.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
11-624