TM 55-1520-240-23-9
11-132
INSTALL THRUST BALANCE SPRING
11-132
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Materials:
None
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
1.
Connect spring (1) to CCD actuator arm (2)
between lugs (3). Long end (4) of spring to arm
and bend (5) in arm forward.
2.
Connect spring (1) small end, to marked hole of
strap (9).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check of flight controls (TM
55-1520-240-T).
Install closet backup panel (Task 2-2).
Install closet acoustic blanket (Task 2-108).
END OF TASK
11-590
