TM 55-1520-240-23-9
11-3
LUBRICATE FLIGHT CONTROL SYSTEM ROD END (ANTIFRICTION)
(Continued)
11-3
NOTE
The above procedure removes some
dirty grease from the bearing cavity
and tends to maximize the amount of
grease left inside. The purpose of this
type of re-lubrication is to maintain
internal corrosion protection as much
as to sustain low friction.
i.
Using a clean cloth, wipe the excess grease
off the bearing rod end.
j.
Turn on the electrical and hydraulic power.
FOLLOW-ON MAINTNENACE:
None
END OF TASK
11-10