TM 55-1520-240-23-8
10-122
BLEEDING AND PRIMING ENGINE FUEL CONTROLS
(Continued)
10-122
6.
Set ENGINE CONDITION lever (7) to GROUND.
7.
Set applicable MAIN AFT and FWD switches (8)
to ON.
8.
Set applicable ENGINE switch (9) to MOTOR.
9.
Observe flow of fuel from hose (5) into container
(6).
10.
When clear, air free fuel flows from hose (5),
cycle ENGINE CONDITION lever (7) from
GROUND to STOP at least five times.
11.
Set ENGINE CONDITION lever (7) to STOP.
12.
Set ENGINE switch (9) to OFF.
13.
Set MAIN AFT and FWD switches (8) to OFF.
14.
Shutdown ac and hydraulic power (Tasks 1-37
and 1-38).
10-564