TM 55-1520-240-23-8
10-90
INSTALL NO. 1 SYSTEM (LEFT SIDE) MAIN FUEL TANK SERVICING CHECK
VALVE
(Continued)
10-90
1.
Remove barrier material and masking tape from
manifold (1). Clean any tape residue from face
of flange. Use dry cleaning solvent (E162) and
cloths (E135). Use goggles for eyes. Wear
gloves (E184.1).
2.
Position check valve (2), flanged connector (3)
and support plate (4) on manifold (1).
3.
Install six screws (5).
4.
Install four packings (6), one on flanged
connector (3), one on tube (7) and two on elbow
(8).
10-433