TM 55-1520-240-23-8
10-88.3
INSTALL CROSSOVER HOSE
(Continued)
10-88.3
NOTE
The procedures for installing the
crossover tube to the right and left
crossover tube elbow connections are
the same. The left side is described.
1.
Working under the floor at sta. 260, install the
crossover hose (1) loosely with four clamps (2)
and associated hardware. Center the hose
laterally.
2.
Install crossover hose (1) on sleeve (3). Hand
tighten ring nut (4).
3.
Install hose collar assembly halves (5) on
crossover hose (1).
4.
Install and tighten three bolts (6), three washers
(7), and two nuts (8) on hose collar assembly
(5). Lockwire ring nut (4) to hose collar assembly
mounting bolt (6). Use lockwire (E233).
5.
Tighten the four clamps (2) along sta. 260.
10-421
