TM 55-1520-240-23-8
10-88.1
REMOVE CROSSOVER HOSE
(Continued)
10-88.1
NOTE
The procedure for removing the
crossover tube from the right and left
crossover tube elbow connections are
the same. The left side is described.
1.
Working in the landing gear box remove lockwire
and loosen ring nut (1) on elbow (2) and ring nut
(3) on tee (4). Remove elbow.
2.
Cover hole in tee (4) with barrier material (E80)
and tape (E388).
3.
Place a container underneath crossover hose
elbow (5) to collect any residual fuel. Loosen nut
(6) on hose assembly (7).
4.
Remove hose assembly (7) from crossover hose
elbow (5). Cap hose assembly and move out
of the way.
5.
Remove six bolts (8) and sealing washers (9)
from crossover hose elbow (5). Discard six
sealing washers.
6.
Remove crossover hose elbow (5), preformed
packing (10) and gasket (11) from sleeve (12).
7.
Remove 26 bolts (13) and sealing washers (14)
from access cover (15). Discard 26 sealing
washers. Remove access cover.
10-415
