TM 55-1520-240-23-8
10-87
REMOVE PRESSURE REFUELING ADAPTER
(Continued)
10-87
1.
Position grounded container (1) under drain
fitting (2).
2.
Disconnect hose elbow (3) from the drain fitting
(2). Collect spilled fuel in container (1).
3.
Connect fitting (3) to drain fitting (2).
3.1.
On aircraft with 68 , disconnect elbow (3.1) of
vacuum relief line (3.2), from nipple (3.3) on
refueling adapter (7).
4.
Disconnect ring nut (4).
5.
Remove four bolts (5) and washers (6) from
adapter (7).
6.
Remove adapter (7) and elbow (8) as an
assembly through the opening in the adapter
support.
7.
Remove elbow (3) from adapter (7) by
disconnecting ring nut (9).
8.
Remove packing (10) at ring nuts (4) and (9).
9.
Wipe up any spilled fuel. Use cloths (E135).
10.
Remove container (1).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
10-404